The AquaVent 5 Vented Water Level Datalogger records accurate water level and temperature measurements in shallow groundwater and surface water applications. It combines pressure and temperature sensors, hydrophobic filters and datalogger within a 22 mm x 173 mm (7/8" x 6.8") stainless steel housing with corrosion-resistant coating.
The AquaVent 5 uses a gauged pressure transducer; it is open to the atmosphere via a vented cable to surface. Atmospheric pressure is applied to the transducer diaphragm, providing a cancellation effect for barometric pressure. This results in actual water level recordings.
The vented cable and Solinst AquaVent 5 logger are protected from moisture by built-in desiccants and hydrophobic filters.
The vented pressure transducer is made of Hastelloy®, making it extremely durable and accurate in a wide range of temperature and monitoring conditions. The sensor provides an accuracy of 0.05% FS, and can withstand 2 times over-pressure without permanent damage.
The robust memory can hold up to 150,000 data sets when programmed in Solinst Levelogger® Software.
Features
- Gauged pressure sensor for highly-accurate water level measurements: 0.05% FS
- Multiple built-in hydrophobic filters and desiccants — no need to replace, reduces maintenance
- Easy-to-access, user-replaceable batteries in Wellhead
- Options for MODBUS (RS-232/RS-485) and SDI-12
- Separate cables for each communication protocol
- Corrosion and abrasion-resistant coating baked-on using polymerization technology
Applications
- Ideal for shallow applications: up to 65 ft (20 m) submergence
- Aquifer characterization: pumping tests, slug tests, etc
- Stream gauging, lake and reservoir management
- Watershed, drainage basin and recharge monitoring
- Stormwater and runoff monitoring
- Long-term water level monitoring in wells and surface water
AquaVent Benefits
- Automatic barometric compensation reduces time required for post data processing
- Integrate into a third-party data collection system for remote real-time data
- Continuous, reliable water level data for long-term monitoring projects
- Actual water level readings for instant aquifer test results
AquaVent Datalogger
Level Sensor: | Piezoresistive Silicon with Hastelloy Sensor | |
Accuracy: | ± 0.05% FS Typical | |
Stability of Readings: | Superior, low noise | |
Resolution: | 0.001% FS to 0.0006% FS | |
Units of Measure: | m, cm, ft., psi, kPa, bar, ºC, ºF | |
Normalization: | Automatic Temperature Compensation | |
Temp. Comp. Range: | 0º to 50ºC | |
Temperature Sensor:> | Platinum Resistance Temperature Detector (RTD) | |
Operating Temperature: | -20ºC to 80ºC | |
Temp. Sensor Accuracy: | ± 0.05ºC | |
Temp. Sensor Resolution: | 0.003°C | |
Battery Life Estimate: | 8 Years — based on 1 reading/minute | |
Clock Accuracy: | ± 1 minute/year (-20ºC to 80ºC) | |
Maximum Readings: | 150,000 sets of readings | |
Memory: | Slate and Continuous | |
Communication: | 57,600 bps Solinst USB, 1200 baud SDI-12, Modbus RS-485/RS-232 (various speeds) | |
Size: | 22 mm x 173 mm (7/8" x 6.8") | |
Weight: | 182 grams (6.4 oz.) | |
Corrosion Resistance | Baked-on coating using polymerization technology (inside and out) | |
Wetted Materials: | Delrin®, Viton®, 316L stainless steel, Hastelloy | |
Sampling Modes: | Linear, Event & User-Selectable with Repeat Mode, Future Start, Future Stop, Real-Time View | |
Measurement Rates: | 1/8 sec to 99 hrs | |
Barometric Compensation: | Automatic |
AquaVent SP/SPX Wellhead
Materials: | Polypropylene, Delrin, 316 stainless steel, Viton, Polyamide | |
Dimensions: | 4.0" x 5.5" (102 mm x 140 mm) | |
Operating Temperature: | -20ºC to 80ºC | |
IP Rating: | IP 64 (dust and splash proof) | |
Batteries: | Four (4) 1.5V AA lithium batteries | |
Wellhead Comm. Cable Length: | 15 ft (4.5 m) |
AquaVent Vented Cable
Wetted Materials: | Polyurethane, 316 stainless steel, Viton | |
Diameter: | Cable: 0.32" (8 mm), Connectors: 0.86" (22 mm) | |
Lengths: | 1 to 500 ft | |
Max. Bend Radius: | 1" (25 mm) | |
Operating Temperature: | -20ºC to 80ºC |
Communication Options
The AquaVent has options for communicating strictly with Solinst software and accessories, or integrating into a telemetry system, SCADA/PLC system or a third-party datalogger.
The AquaVent can communicate with Levelogger Software. It can be used with the Solinst Levelogger App and Interface, and the DataGrabber™.
AquaVent Communication Wellhead
The AquaVent Communication Wellhead fits conveniently onto a 2" (50 mm) well casing using the well cap base (a 4" well adaptor is available).
There are two options: the SP Wellhead has a connection for communicating with Solinst software and accessories; the SPX Wellhead has an additional connection for communicating with third party dataloggers or telemetry systems using MODBUS (RS-232/RS-485) or SDI-12 protocols.
Each Wellhead contains 4 1.5V AA lithium batteries that power the AquaVent logger. They are user-replaceable and can last 8 years based on 1 reading per minute (the internal AquaVent logger battery is only used to maintain the clock).
For permanent moisture protection, the Wellheads contain multiple built-in desiccants and have a hydrophobic filter where the vented cable terminates at surface.
SP Wellhead
One 10-Pin Connection for Solinst Software and Accessory Connector Cables
SPX Wellhead
Additional 12-Pin Connection for SDI-12 and MODBUS RS-232 and RS-485 Connector Cables
Models | Full Scale (FS) | Accuracy | Resolution |
---|---|---|---|
M5 | 5 m (16.4 ft.) | ± 0.3 cm (0.010 ft) | 0.001% FS |
M10 | 10 m (32.8 ft.) | ± 0.5 cm (0.016 ft) | 0.0006% FS |
M20 | 20 m (65.6 ft) | ± 1 cm (0.032 ft) | 0.0006% FS |