Synchronize & Streamline Your Barometric Compensation Efforts, Across Your Entire Site
Accurate Barometric Compensation
The Leveloggers measures absolute pressure (water pressure + atmospheric pressure) expressed in feet, meters, centimeters, psi, kPa, or bar.
The most accurate method of obtaining changes in water level is to compensate for atmospheric pressure fluctuations using a Barologger 5, avoiding time lag in the compensation. The Barologger 5 is set above high water level in one location on site. One Barologger can be used to compensate all Leveloggers in a 30 km (20 mile) radius and/or with every 300 m (1000 ft.) change in elevation.
The Levelogger Software Data Compensation Wizard automatically produces compensated data files using the synchronized data files from the Barologger and Leveloggers on site.
The Barologger 5 uses pressure algorithms based on air rather than water pressure, giving superior accuracy. The recorded barometric information can also be very useful to help determine barometric lag and/or barometric efficiency of the monitored aquifer.
The Barologger 5 records atmospheric pressure in psi, kPa, or mbar. When compensating submerged Levelogger 5, Edge, Gold or Junior data, Levelogger Software can recognize the type of Levelogger and compensate using the same units found in the submerged data file (e.g. feet or meters). This makes the Barologger 5 backwards compatible.
Features
- 0.05% FS Accuracy
- Corrosion resistant Titanium based PVD coating
- Robust Hastelloy pressure sensor
- Accurate temperature compensation
- Memory for up to 120,000 readings
- Basic and advanced data compensation options
Fast communication and downloading speeds with a high speed Optical Reader
Flexible Communication
Levelogger PC Software is streamlined, making it easy to program dataloggers, and to view and compensate data, in the office or in the field. The software has useful programming options, including compressed and repeat sampling, and future start/stop. Data compensation has been simplified, and allows multiple data files to be barometrically compensated at once.
The extremely intuitive Solinst Levelogger App, and Levelogger App Interface on your in-field Leveloggers, creates a Bluetooth® connection between your Leveloggers and smart device. Also an option, the DataGrabber is a field-ready, USB data transfer unit designed specifically for the Levelogger Series.
Remote monitoring options include the LevelSender, a simple and compact device that fits right in a 2" well, STS Telemetry Systems, and RRL Remote Radio Link. In addition, Levelogger Series dataloggers are SDI-12 compatible.
Applications
- Aquifer characterization: pumping tests, slug tests, etc.
- Watershed, drainage basin and recharge monitoring
- Stream gauging, lake and reservoir management
- Harbour and tidal fluctuation measurement
- Wetlands and stormwater run-off monitoring
- Water supply and tank level measurement
- Mine water and landfill leachate management
- Long-term water level monitoring in wells, surface water bodies and seawater environments
Water Level Datalogger
The Levelogger Edge has a battery life of 10 years based on a 1-minute sampling rate. It has FRAM memory for 40,000 sets of data points - or up to 120,000 using the compressed linear sampling option.
The Levelogger Edge uses a Faraday cage design, which protects against power surges or electrical spikes caused by lightning. Its durable maintenance-free design, high accuracy and stability, make the Levelogger Edge the most reliable instrument for long-term, continuous water level recording.
Levelogger Edge Specifications
Level Sensor: | Piezoresistive Silicon with Hastelloy Sensor | |
Accuracy: | ± 0.05% FS (Barologger Edge: ± 0.05 kPa) | |
Stability of Readings: | Superior, low noise | |
Units of Measure: | m, cm, ft., psi, kPa, mBar, ºC. ºF (Barologger Edge: psi, kPa, mBar, ºC, ºF) |
|
Normalization: | Automatic Tempurature Compensation | |
Temperature Comp.Range | 0º to 50ºC (Barologger Edge: -10 to +50ºC) | |
Temperature Sensor: | Platinum Resistance Temperature Detector (RTD) | |
Temp. Sensor Accuracy: | ± 0.05°C | |
Temp. Sensor Resolution: | 0.003°C | |
Battery Life: | 10 Years - based on one reading/min | |
Clock Accuracy: | ± 1 minute/year (-20˚C to 80˚C) | |
Operating Temperature: | -20°C to 80°C | |
Maximum # Readings: | 40,000 readings FRAM memory, or up to 120,000 using linear data compression | |
Memory Mode: | Slate and Continuous | |
Communication: | Optical Infrared Interface. Conversion to RS-232, USB, SDI-12. Serial at 9600 bps, 38,400 bps with USB | |
Size: | 7/8" x 6.25" (22 mm x 159 mm) | |
Weight: | 4.6 oz. (129 grams) | |
Corrosion Resistance: | Titanium based PVD coating | |
Other Wetted Materials: | Delrin®, Viton®, 316L stainless steel,Hastelloy, Titanium based PVD coating | |
Sampling Modes: | Linear, Event & User-Selectable with Repeat Mode, Future Start, Future Stop, Real-Time View | |
Measurement Rates: | 1/8 sec to 99 hrs | |
Barometric Compensation: | Software Wizard and one Barologger in local area (approx. 20 miles/30 km) radius |
Models | Full Scale (FS) | Accuracy |
---|---|---|
Barologger | Air only | ± 0.05 kPa |
M5 | 5 m (16.4 ft.) | ± 0.3 cm (0.010 ft.) |
M10 | 10 m (32.8 ft.) | ± 0.5 cm (0.016 ft.) |
M20 | 20 m (65.6 ft.) | ± 1 cm (0.032 ft.) |
M30 | 30 m (98.4 ft.) | ± 1.5 cm (0.064 ft.) |
M100 | 100 m (328.1 ft.) | ± 5 cm (0.164 ft.) |
M200 | 200 m (656.2 ft.) | ± 10 cm (0.328 ft.) |