Overview
Solinst Disposable In-Line Filters are specifically designed for the preparation of groundwater samples for dissolved metals analysis and for filtering large volumes of turbid groundwater. These filters are any easy effective way to meet the filtration requirements of the US EPA, as they incorporate a 0.45 m membrane into a disposable device.
Advantages of Disposable Filters
Solinst supplies in-line disposable filters designed specifically for the preparation of groundwater samples for dissolved metals analysis and for filtering large volumes of turbid groundwater.
These filters are an easy, effective way to meet the filtration requirements of the U.S. Environmental Protection Agency, as they incorporate a 0.45 μm membrane into a disposable device.
650 cm2 High Capacity Filter
Excellent for sampling in silty or particulate-laden groundwater, the high capacity filter gives 650 cm2 of effective filtration area.
Advantages Filter Design
- Compact size with no bulky holder requiring replacement filter discs
- Almost five times the effective filtration area obtained with 142 mm disc filters
- Reduces the need for multiple filter changes
- Assures rapid sample filtration
- Fast change-out for increased efficiency
- No hazardous residue on the fitler housing
- No handling of the filter element for enhanced safety
- Self-contained, low maintenance and disposal
Saves Time and Money
- No costly decontamination
- No assembly/disassembly, nor the multiple filter changes associated with reusable filter holders
Specifications and Filter Rinse Results
Specifications
Materials | |||
---|---|---|---|
Housings: | Polypropylene | ||
Membrane: | Polypropylene | ||
Pore Size | |||
0.45 µm | |||
Maximum Operating Pressure | |||
72 psi (5 bar) | |||
Maximum Operating Temperature | |||
High Flow: 39ºC (102ºF) |
Disposable Filter Rinse Results
Disposable Filters have been tested for the following chemicals and the effluent was found to have non-detectable levels using equipment with the following detection limits. | |||
---|---|---|---|
Element | Detection Limit (mg/L) | Element | Detection Limit (mg/L) |
Antimony | <0.0010 | Thallium | <0.0010 |
Arsenic | <0.0010 | Zinc | <0.0300 |
Beryllium | <0.0020 | Benzene | <0.0010 |
Cadmium | <0.0050 | Bromomethane | <0.0050 |
Copper | <0.0200 | Carbon TetraChloride | <0.0010 |
Lead | <0.0050 | Chlorobenzene | <0.0010 |
Chromium | <0.0100 | Chloro-dibromomethane | <0.0010 |
Mercury | <0.0002 | Dichloro-benzene Group | <0.0010 |
Nickel | <0.0200 | Dichloro-ethane Group | <0.0010 |
Selenium | <0.0200 | PCB Group | <0.0005 |
Silver | <0.0300 | PP Acid Extractables | <0.0100 |
Inlet and Outlet Connections
Each filter has 3/8" (9.5 mm) hose barb inlet and outlet connections, as well as a 1/8" NPTM vent/drain connection.