The Solinst LevelVent 5 is a vented version of our popular Levelogger®. The highly accurate datalogger is designed to record water level and temperature measurements during shallow groundwater and surface water deployments.
The LevelVent 5 logger contains pressure and temperature sensors, a battery, memory for up to 150,000 data logs, and hydrophobic filter within a 22 mm x 173 mm (7/8" x 6.8") stainless steel housing with a corrosion-resistant coating.
The LevelVent uses a gauged pressure transducer; it is open to the atmosphere via a vented cable to the wellhead. The compact LevelVent wellhead is designed to fit in a Solinst 2" Well Cap Assembly, and provides easy connection for communication accessories.
The vented cable and Solinst LevelVent 5 logger are protected from moisture by permanent, built-in desiccants and hydrophobic filters in the logger and the wellhead.
The vented pressure transducer is made of Hastelloy®, making it extremely durable and accurate in a wide range of temperature and monitoring conditions. The sensor provides an accuracy of 0.05% FS, and can withstand 2 times over-pressure without permanent damage.
Why the Solinst LevelVent 5 is a Great Choice:
- Vented version of our popular Levelogger®
- Accurate (0.05%FS) water level data
- 10 year battery based on 1 reading per minute
- No desiccants to replace
- Extremely durable vented cable (up to 500ft length)
- Custom blowout fitting for easy vented cable maintenance
- Complete compatibility with Levelogger accessories and Solinst telemetry systems
The LevelVent 5 is designed to provide instantly accurate water level data, without the need for barometric compensation. If you need true water level data right on site, without running any data compensation routines, the LevelVent 5 is the right choice for your water level monitoring application.
Where to Use the LevelVent 5:
- Ideal for deployments to 500 ft, with up to 65 ft submergence
- Excellent for aquifer characterization: pumping tests, slug tests, and more
- Stream gauging, lake monitoring, reservoir and dam management installations
- Watershed, drainage basin and groundwater recharge monitoring
- Gauged water level sensor is suited to stormwater event and runoff monitoring where rapid readings are typically required
- Water supply and tank level measurement
- Long-term water level monitoring in wells and surface water
Features
- Corrosion and abrasion-resistant coating baked on using polymerization technology
- Gauged pressure sensor for highly-accurate water level measurements: 0.05% FS
- Compact wellhead makes deployment simple using a Solinst 2" Well Cap Assembly
- Communication cables and accessories connect directly to the wellhead
- Long-lasting battery included in logger
- Built-in hydrophobic filters and desiccants — no need to replace, reduces maintenance
Applications
- Ideal for shallow deployment: up to 65 ft (20 m) submergence
- Aquifer characterization: pumping tests, slug tests, etc.
- Stream gauging, lake, reservoir and dam management
- Watershed, drainage basin and recharge monitoring
- Stormwater and runoff monitoring
- Water supply and tank level measurement
- Long-term water level monitoring in wells and surface water
Vented Datalogger Advantages
- Continuous, reliable water level data for longterm monitoring projects
- No barometric compensation required, saving data processing time
- Instant water level data for real-time aquifer test results
LevelVent Water Level Datalogger
Level Sensor: | Piezoresistive Silicon with Hastelloy Sensor | |
Accuracy: | ± 0.05% FS Typical | |
Stability of Readings: | Superior, low noise | |
Resolution: | 0.001% FS to 0.0006% FS | |
Units of Measure: | m, cm, ft., psi, kPa, bar, ºC, ºF | |
Normalization: | Automatic Temperature Compensation | |
Temp. Comp. Range: | 0º to 50ºC | |
Temperature Sensor:> | Platinum Resistance Temperature Detector (RTD) | |
Operating Temperature: | -20ºC to 80ºC | |
Temp. Sensor Accuracy: | ± 0.05ºC | |
Temp. Sensor Resolution: | 0.003°C | |
Battery Life Estimate: | 10 Years — based on 1 reading/minute | |
Clock Accuracy: | ± 1 minute/year (-20ºC to 80ºC) | |
Maximum Readings: | 150,000 sets of readings | |
Memory: | Slate and Continuous | |
Communication: | 9600 bps Solinst USB | |
Size: | 22 mm x 173 mm (7/8" x 6.8") | |
Weight: | 182 grams (6.4 oz) | |
Corrosion Resistance | Baked-on coating using polymerization technology (inside and out) | |
Wetted Materials: | Delrin®, Viton®, 316L stainless steel, Hastelloy, PFAS-free PTFE coating | |
Sampling Modes: | Linear, Event & User-Selectable with Repeat Mode, Future Start, Future Stop, Real-Time View | |
Measurement Rates: | 1/8 sec to 99 hrs | |
Barometric Compensation: | Automatic |
LevelVent Wellhead
Materials: | Black Delrin, 316 Stainless Steel, Viton | |
Dimensions: | 1.2" x 3.0" (30 mm x 76 mm) | |
Operating Temperature: | -20ºC to 80ºC | |
IP Rating: | IP 64 (dust and splash proof) |
LevelVent 5 Vented Cable Options
LevelVent 5 vented cable assemblies are available in custom lengths of up to 500 feet.
Vented cables contain communication wires, as well as a vent tube running the length of the cable. Vented cables provide direct read communication from the LevelVent 5 logger to the wellhead. The vent tube and wires are jacketed in polyurethane, providing durability and protection.
The vented cables ar e easily and securely connected to the LevelVent 5 logger and wellhead, using stainless steel twist connections. A 2" Well Cap Assembly and hanger bracket are included to support the wellhead and vented cable when deployed.
LevelVent Vented Cable
Wetted Materials: | Polyurethane, 316 stainless steel, Viton | |
Diameter: | Cable: 0.32" (8 mm), Connectors: 0.86" (22 mm) | |
Lengths: | 1 to 500 ft | |
Max. Bend Radius: | 1" (25 mm) | |
Operating Temperature: | -20ºC to 80ºC |
Models | Full Scale (FS) | Accuracy | Resolution |
---|---|---|---|
M5 | 5 m (16.4 ft.) | ± 0.3 cm (0.010 ft) | 0.001% FS |
M10 | 10 m (32.8 ft.) | ± 0.5 cm (0.016 ft) | 0.0006% FS |
M20 | 20 m (65.6 ft) | ± 1 cm (0.032 ft) | 0.0006% FS |