Soil, Land & Waste Management

SVOFFICE™5/GE uses the power of the FlexPDE® finite element solution engine. FlexPDE™ provides the benefits of a general finite element solver, fully automatic mesh generation and mesh refinement in 1D, 2D, and 3D models.

The mature and simplified user interface is the result of 14 years of refinement and features a brand new “dual-mode” project manager. It helps new users get up and running fast and presents more advanced users with an expanded, fully-featured user interface.

The suite offers a geotechnical and geoenvironmental applications focus and is well suited for solving complex flow and contaminant transport models.

SVOFFICE™5/GE Suite Includes...



Key features of SVOFFICE™5/GE:

  • Multi-Plane Slope Stability Analysis:The SVSLOPE® module enables rapid, thorough, and simple to perform analysis of a 3D site at many locations simultaneously

  • Advanced Orientation Analysis:Models can now be built fully in 3D and a slip in any arbitrary sliding direction can be analyzed. This ability is exclusive to the SVSLOPE®3D module and is not offered by any other competing product.

  • Automatic Mesh Generation and Manual Refinement:Automatic mesh generation and manual refinement greatly enhances model stability, accuracy, and convergence

  • Advanced Model Coupling:Coupling of the air/water/thermal phases allows more comprehensive analysis of i) cover designs and, ii) waste rock flow, and iii) various other applications. Coupled density-dependant flow allows handling of salt-water/ fresh water potash mine tailings scenarios and tidal inflow scenarios.

  • 3D Modeling Solutions:Modeling of systems which are not adequately represented by a simplified 2D cross section may be accomplished in full 3D. Examples include regional flow, levee analysis, and open pits

  • NEW SVDESIGNER™ Conceptual Modeling Module:This brand new software program is tightly integrated within SVOFFICE™5/GT and allows for the representation and manipulation of complex 3D geometry and takes 3D modeling to a whole new level

  • Spatially Varying Material Properties:Material properties may be set to vary spatially in any particular region of the model domain. This is available in our SVSLOPE®3D and SVFLUX™GE modules.

  • Comprehensive Probabilistic Analysis:Monte Carlo, APEM, Latin Hypercube and other types of probabilistic analysis may be carried out in our SVSLOPE® module. Monte Carlo analysis for steady state models can be carried out in our SVFLUX™GE module.

  • NEW SVSOILS™:Formerly SoilVision®... a database of unsaturated hydraulic, thermal and stress soil properties has been completely rewritten and redesigned

  • Mesh Integrationwith SVDESIGNER™

  • 3rd Party Model Import:SVSLOPE®3D can import models from SLOPE/W, Slide and CLARA-W for further analysis

  • Easy to Use:Featuring a familiar user interface with easy to understand functions and redsigned icons. The menu system has been redesigned to simplify the number of choices to the user, greatly reducing the complexity of the software interface and providing a better user experience.

  • High-Performance Graphics Engine:Allows for the creation of large, complex models, excellent responsiveness for fluid transformations, stunning vizualization of results and a fantastic user experience

  • NEW SVOFFICE™5 Manager:Provides a more intuitive experience when managing projects and models

  • Improved Charting:High quality, exportable charts.

  • World Class Support:Dedicated, responsive team

  • QAQC:Comprehensive testing and verification program.

    		•

    Details:

    SVOFFICE™5/GE offers advanced coupling between software products for the solution of complex models involving flow / thermal / pore-air coupling or flow / transport numerical models. For example, pore-water pressures can be imported to form the basis of a slope-stability model. The SVSLOPE® package has continued to improve and can now create 3D models of increased complexity. This is due in part to a significant addition to SVOFFICE™5/GE...the new SVDESIGNER™ conceptual modeling software package. This brand new software program is tightly integrated within SVOFFICE™5/GE and allows for the representation and manipulation of complex 3D geometry and takes 3D modeling to a whole new level.

    SVSLOPE®3D also takes full advantage of a new and improved graphics engine that provides faster representation and viewing of increasingly complex 3D models.

    A re-designed SVSOILS™ application is now fully integrated with the product suite. This newly upgraded software allows simpler estimations of unsaturated hydraulic properties for groundwater seepage modeling. Also implemented is the ability to manage constitutive behaviours of complex oil-sand tailing materials.

    Other capabilities include full coupling including the calculation of actual evaporation with SVFLUX™ and SVHEAT™, which make it the world’s premier package for analysis of earth covers.

    SVOFFICE™5/GE offers advanced coupling between software products for the solution of complex models involving flow / thermal / pore-air coupling or flow / transport numerical models. For example, pore-water pressures can be imported to form the basis of a slope-stability model.

    The SVFLUX™ and SVCHEM™ coupling provides an advanced solution for environmental problems involving fate and transport. The automatic mesh refinement is particularly useful for accurate solution of models with a moving contaminant front.

    Key Features

  • Improved Charting:High quality, exportable charts.

  • 3D Modeling Solutions:Modeling of systems which are not adequately represented by a simplified 2D cross section may be accomplished in full 3D. Examples include regional flow, levee analysis, and open pits.

  • NEW SVDESIGNER™ Conceptual Modeling Module:This brand new software program is tightly integrated within SVOFFICE™5/GE and allows for the representation and manipulation of complex 3D geometry and takes 3D modeling to a whole new level.

  • Automatic Mesh Generation and Refinement:Automatic mesh generation and refinement greatly enhances model stability, accuracy, and convergence.

  • Advanced Orientation Analysis:Models can now be built fully in 3D and a slip in any arbitrary sliding direction can be analyzed. This ability is exclusive to the SVSLOPE®3D module and is not offered by any other competing product.

  • Advanced Model Coupling:Coupling of the air/water/thermal phases allows more comprehensive analysis of i) cover designs and, ii) waste rock flow, and iii) various other applications. Coupled density-dependant flow allows handling of salt-water/ fresh water potash mine tailings scenarios and tidal inflow scenarios.

  • Spatially Varying Material Properties:Material properties may be set to vary spatially in any particular region of the model domain. This is available in our SVSLOPE® and SVFLUX™GE modules

  • Comprehensive Probabilistic Analysis:Monte Carlo, APEM, Latin Hypercube and other types of probabilistic analysis may be carried out in our SVSLOPE® module. Monte Carlo analysis for steady state models can be carried out in our SVFLUX™GE module.

  • NEW SVSOILS™:Formerly SoilVision®... a database of unsaturated hydraulic, thermal and stress soil properties has been completely rewritten and redesigned.

  • Easy to Use:Featuring a familiar user interface with easy to understand functions and redesigned icons. The menu system has been redesigned to simplify the number of choices to the user, greatly reducing the complexity of the software interface and providing a better user experience.

  • NEW High-Performance Graphics Engine:the new 3D CAD graphics engine provides measurably faster overall operation, with the biggest performance increases in the areas of...

    • creation and manipulation of larger more complex models

    • quicker rotation and translation of objects

    • faster transformations

    • high quality / print-ready client visuals

    • improved CAD editing controls and responsiveness.

  • NEW SVOFFICE™5 Manager:A complete overhaul of the SVOFFICE™5 Manager provides a more intuitive experience. We have simplified the process of creating, managing and sharing your models and projects. With one click you can easily switch the Manager between Learning mode and Expert mode. Learning mode presents the user with the bare essentials and user guidance to get you up and running fast. Expert mode expands the user interface and places all of the key project management components at your fingertips.

  • World Class Support:Highly dedicated team with tracking and fast response to all raised issues - typically within 24 - 48 hours.

  • QAQC:Comprehensive testing and verification program.

    • SVCORE™ Finite Element Engine

    The most significant change to any particular module within our SVOFFICE™5/GT software has been to the SVSOLID™GT module which has been completely redesigned and utilizes a new SVCORE™ Finite Element Engine solver. The new solver has been developed over a combined 20 years and allows fast and stable solution of extremely large three-dimensional numerical models. The design changes and technical advances in the software firmly position SVSOLID™GT as the premiere stress / deformation software package available in the world today.

    SVOFFICE™5 User Manual

      SVOFFICE5 Manual

    Verification Manuals

      SVSLOPE5 Verification Manual

      SVFLUX5GE Verification Manual

      SVHEAT5GE Verification Manual

      SVCHEM5GE Verification Manual

      SVSIR5GE Verification Manual



    click here for a Quote...!